DestinationRule defines policies that apply to traffic intended for a service after routing has occurred. These rules specify configuration for load balancing, connection pool size from the sidecar, and outlier detection settings to detect and evict unhealthy hosts from the load balancing pool. For example, a simple load balancing policy for the ratings service would look as follows:

Version specific policies can be specified by defining a named subset and overriding the settings specified at the service level. The following rule uses a round robin load balancing policy for all traffic going to a subset named testversion that is composed of endpoints (e.g., pods) with labels (version:v3).

Note: Policies specified for subsets will not take effect until a route rule explicitly sends traffic to this subset.

Traffic policies can be customized to specific ports as well. The following rule uses the least connection load balancing policy for all traffic to port 80, while uses a round robin load balancing setting for traffic to the port 9080.

ConnectionPoolSettings

Connection pool settings for an upstream host. The settings apply to each individual host in the upstream service. See Envoy’s circuit breaker for more details. Connection pool settings can be applied at the TCP level as well as at HTTP level.

For example, the following rule sets a limit of 100 connections to redis service called myredissrv with a connect timeout of 30ms

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: bookinfo-redis
spec:
  host: myredissrv.prod.svc.cluster.local
  trafficPolicy:
    connectionPool:
      tcp:
        maxConnections: 100
        connectTimeout: 30ms
        tcpKeepalive:
          time: 7200s
          interval: 75s

Field	Type	Description	Required
`tcp`	`TCPSettings`	Settings common to both HTTP and TCP upstream connections.	No
`http`	`HTTPSettings`	HTTP connection pool settings.	No

ConnectionPoolSettings.HTTPSettings

Settings applicable to HTTP1.1/HTTP2/GRPC connections.

Field	Type	Description	Required
`http1MaxPendingRequests`	`int32`	Maximum number of pending HTTP requests to a destination. Default 2^32-1.	No
`http2MaxRequests`	`int32`	Maximum number of requests to a backend. Default 2^32-1.	No
`maxRequestsPerConnection`	`int32`	Maximum number of requests per connection to a backend. Setting this parameter to 1 disables keep alive. Default 0, meaning “unlimited”, up to 2^29.	No
`maxRetries`	`int32`	Maximum number of retries that can be outstanding to all hosts in a cluster at a given time. Defaults to 2^32-1.	No
`idleTimeout`	`Duration`	The idle timeout for upstream connection pool connections. The idle timeout is defined as the period in which there are no active requests. If not set, there is no idle timeout. When the idle timeout is reached the connection will be closed. Note that request based timeouts mean that HTTP/2 PINGs will not keep the connection alive. Applies to both HTTP1.1 and HTTP2 connections.	No
`h2UpgradePolicy`	`H2UpgradePolicy`	Specify if http1.1 connection should be upgraded to http2 for the associated destination.	No

ConnectionPoolSettings.HTTPSettings.H2UpgradePolicy

ConnectionPoolSettings.TCPSettings

Name	Description
`DEFAULT`	Use the global default.
`DO_NOT_UPGRADE`	Do not upgrade the connection to http2. This opt-out option overrides the default.
`UPGRADE`	Upgrade the connection to http2. This opt-in option overrides the default.

Settings common to both HTTP and TCP upstream connections.

Field	Type	Description	Required
`maxConnections`	`int32`	Maximum number of HTTP1 /TCP connections to a destination host. Default 2^32-1.	No
`connectTimeout`	`Duration`	TCP connection timeout.	No
`tcpKeepalive`	`TcpKeepalive`	If set then set SO_KEEPALIVE on the socket to enable TCP Keepalives.	No

ConnectionPoolSettings.TCPSettings.TcpKeepalive

TCP keepalive.

Field	Type	Description	Required
`probes`	`uint32`	Maximum number of keepalive probes to send without response before deciding the connection is dead. Default is to use the OS level configuration (unless overridden, Linux defaults to 9.)	No
`time`	`Duration`	The time duration a connection needs to be idle before keep-alive probes start being sent. Default is to use the OS level configuration (unless overridden, Linux defaults to 7200s (ie 2 hours.)	No
`interval`	`Duration`	The time duration between keep-alive probes. Default is to use the OS level configuration (unless overridden, Linux defaults to 75s.)	No

DestinationRule

DestinationRule defines policies that apply to traffic intended for a service after routing has occurred.

Field	Type	Description	Required
`host`	`string`	The name of a service from the service registry. Service names are looked up from the platform’s service registry (e.g., Kubernetes services, Consul services, etc.) and from the hosts declared by ServiceEntries. Rules defined for services that do not exist in the service registry will be ignored. Note for Kubernetes users: When short names are used (e.g. “reviews” instead of “reviews.default.svc.cluster.local”), Istio will interpret the short name based on the namespace of the rule, not the service. A rule in the “default” namespace containing a host “reviews” will be interpreted as “reviews.default.svc.cluster.local”, irrespective of the actual namespace associated with the reviews service. To avoid potential misconfigurations, it is recommended to always use fully qualified domain names over short names. Note that the host field applies to both HTTP and TCP services.	Yes
`trafficPolicy`	`TrafficPolicy`	Traffic policies to apply (load balancing policy, connection pool sizes, outlier detection).	No
`subsets`	`Subset[]`	One or more named sets that represent individual versions of a service. Traffic policies can be overridden at subset level.	No
`exportTo`	`string[]`	A list of namespaces to which this destination rule is exported. The resolution of a destination rule to apply to a service occurs in the context of a hierarchy of namespaces. Exporting a destination rule allows it to be included in the resolution hierarchy for services in other namespaces. This feature provides a mechanism for service owners and mesh administrators to control the visibility of destination rules across namespace boundaries. If no namespaces are specified then the destination rule is exported to all namespaces by default. The value “.” is reserved and defines an export to the same namespace that the destination rule is declared in. Similarly, the value “” is reserved and defines an export to all namespaces. NOTE: in the current release, the `exportTo` value is restricted to “.” or “” (i.e., the current namespace or all namespaces).	No

LoadBalancerSettings

Load balancing policies to apply for a specific destination. See Envoy’s load balancing documentation for more details.

For example, the following rule uses a round robin load balancing policy for all traffic going to the ratings service.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: bookinfo-ratings
spec:
  host: ratings.prod.svc.cluster.local
  trafficPolicy:
    loadBalancer:
      simple: ROUND_ROBIN

The following example sets up sticky sessions for the ratings service hashing-based load balancer for the same ratings service using the the User cookie as the hash key.

 apiVersion: networking.istio.io/v1alpha3
 kind: DestinationRule
 metadata:
   name: bookinfo-ratings
 spec:
   host: ratings.prod.svc.cluster.local
   trafficPolicy:
     loadBalancer:
       consistentHash:
         httpCookie:
           name: user
           ttl: 0s

Field	Type	Description	Required
`simple`	`SimpleLB (oneof)`		Yes
`consistentHash`	`ConsistentHashLB (oneof)`		Yes

LoadBalancerSettings.ConsistentHashLB

Consistent Hash-based load balancing can be used to provide soft session affinity based on HTTP headers, cookies or other properties. This load balancing policy is applicable only for HTTP connections. The affinity to a particular destination host will be lost when one or more hosts are added/removed from the destination service.

Field	Type	Description	Required
`httpHeaderName`	`string (oneof)`	Hash based on a specific HTTP header.	Yes
`httpCookie`	`HTTPCookie (oneof)`	Hash based on HTTP cookie.	Yes
`useSourceIp`	`bool (oneof)`	Hash based on the source IP address.	Yes
`minimumRingSize`	`uint64`	The minimum number of virtual nodes to use for the hash ring. Defaults to 1024. Larger ring sizes result in more granular load distributions. If the number of hosts in the load balancing pool is larger than the ring size, each host will be assigned a single virtual node.	No

LoadBalancerSettings.ConsistentHashLB.HTTPCookie

Describes a HTTP cookie that will be used as the hash key for the Consistent Hash load balancer. If the cookie is not present, it will be generated.

Field	Type	Description	Required
`name`	`string`	Name of the cookie.	Yes
`path`	`string`	Path to set for the cookie.	No
`ttl`	`Duration`	Lifetime of the cookie.	Yes

LoadBalancerSettings.SimpleLB

Standard load balancing algorithms that require no tuning.

Name	Description
`ROUND_ROBIN`	Round Robin policy. Default
`LEAST_CONN`	The least request load balancer uses an O(1) algorithm which selects two random healthy hosts and picks the host which has fewer active requests.
`RANDOM`	The random load balancer selects a random healthy host. The random load balancer generally performs better than round robin if no health checking policy is configured.
`PASSTHROUGH`	This option will forward the connection to the original IP address requested by the caller without doing any form of load balancing. This option must be used with care. It is meant for advanced use cases. Refer to Original Destination load balancer in Envoy for further details.

OutlierDetection

A Circuit breaker implementation that tracks the status of each individual host in the upstream service. Applicable to both HTTP and TCP services. For HTTP services, hosts that continually return 5xx errors for API calls are ejected from the pool for a pre-defined period of time. For TCP services, connection timeouts or connection failures to a given host counts as an error when measuring the consecutive errors metric. See Envoy’s outlier detection for more details.

The following rule sets a connection pool size of 100 HTTP1 connections with no more than 10 req/connection to the “reviews” service. In addition, it sets a limit of 1000 concurrent HTTP2 requests and configures upstream hosts to be scanned every 5 mins so that any host that fails 7 consecutive times with a 502, 503, or 504 error code will be ejected for 15 minutes.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: reviews-cb-policy
spec:
  host: reviews.prod.svc.cluster.local
  trafficPolicy:
    connectionPool:
      tcp:
        maxConnections: 100
      http:
        http2MaxRequests: 1000
        maxRequestsPerConnection: 10
    outlierDetection:
      consecutiveErrors: 7
      interval: 5m
      baseEjectionTime: 15m

Field	Type	Description	Required
`consecutiveErrors`	`int32`	Number of errors before a host is ejected from the connection pool. Defaults to 5. When the upstream host is accessed over HTTP, a 502, 503, or 504 return code qualifies as an error. When the upstream host is accessed over an opaque TCP connection, connect timeouts and connection error/failure events qualify as an error.	No
`interval`	`Duration`	Time interval between ejection sweep analysis. format: 1h/1m/1s/1ms. MUST BE >=1ms. Default is 10s.	No
`baseEjectionTime`	`Duration`	Minimum ejection duration. A host will remain ejected for a period equal to the product of minimum ejection duration and the number of times the host has been ejected. This technique allows the system to automatically increase the ejection period for unhealthy upstream servers. format: 1h/1m/1s/1ms. MUST BE >=1ms. Default is 30s.	No
`maxEjectionPercent`	`int32`	Maximum % of hosts in the load balancing pool for the upstream service that can be ejected. Defaults to 10%.	No
`minHealthPercent`	`int32`	Outlier detection will be enabled as long as the associated load balancing pool has at least minhealthpercent hosts in healthy mode. When the percentage of healthy hosts in the load balancing pool drops below this threshold, outlier detection will be disabled and the proxy will load balance across all hosts in the pool (healthy and unhealthy). The threshold can be disabled by setting it to 0%. The default is 0% as it’s not typically applicable in k8s environments with few pods per service.	No

Subset

A subset of endpoints of a service. Subsets can be used for scenarios like A/B testing, or routing to a specific version of a service. Refer to VirtualService documentation for examples of using subsets in these scenarios. In addition, traffic policies defined at the service-level can be overridden at a subset-level. The following rule uses a round robin load balancing policy for all traffic going to a subset named testversion that is composed of endpoints (e.g., pods) with labels (version:v3).

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: bookinfo-ratings
spec:
  host: ratings.prod.svc.cluster.local
  trafficPolicy:
    loadBalancer:
      simple: LEAST_CONN
  subsets:
  - name: testversion
    labels:
      version: v3
    trafficPolicy:
      loadBalancer:
        simple: ROUND_ROBIN

Note: Policies specified for subsets will not take effect until a route rule explicitly sends traffic to this subset.

One or more labels are typically required to identify the subset destination, however, when the corresponding DestinationRule represents a host that supports multiple SNI hosts (e.g., an egress gateway), a subset without labels may be meaningful. In this case a traffic policy with TLSSettings can be used to identify a specific SNI host corresponding to the named subset.

Field	Type	Description	Required
`name`	`string`	Name of the subset. The service name and the subset name can be used for traffic splitting in a route rule.	Yes
`labels`	`map<string, string>`	Labels apply a filter over the endpoints of a service in the service registry. See route rules for examples of usage.	No
`trafficPolicy`	`TrafficPolicy`	Traffic policies that apply to this subset. Subsets inherit the traffic policies specified at the DestinationRule level. Settings specified at the subset level will override the corresponding settings specified at the DestinationRule level.	No

TLSSettings

SSL/TLS related settings for upstream connections. See Envoy’s TLS context for more details. These settings are common to both HTTP and TCP upstreams.

For example, the following rule configures a client to use mutual TLS for connections to upstream database cluster.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: db-mtls
spec:
  host: mydbserver.prod.svc.cluster.local
  trafficPolicy:
    tls:
      mode: MUTUAL
      clientCertificate: /etc/certs/myclientcert.pem
      privateKey: /etc/certs/client_private_key.pem
      caCertificates: /etc/certs/rootcacerts.pem

The following rule configures a client to use TLS when talking to a foreign service whose domain matches *.foo.com.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: tls-foo
spec:
  host: "*.foo.com"
  trafficPolicy:
    tls:
      mode: SIMPLE

The following rule configures a client to use Istio mutual TLS when talking to rating services.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: ratings-istio-mtls
spec:
  host: ratings.prod.svc.cluster.local
  trafficPolicy:
    tls:
      mode: ISTIO_MUTUAL

Field	Type	Description	Required
`mode`	`TLSmode`	Indicates whether connections to this port should be secured using TLS. The value of this field determines how TLS is enforced.	Yes
`clientCertificate`	`string`	REQUIRED if mode is `MUTUAL`. The path to the file holding the client-side TLS certificate to use. Should be empty if mode is `ISTIO_MUTUAL`.	No
`privateKey`	`string`	REQUIRED if mode is `MUTUAL`. The path to the file holding the client’s private key. Should be empty if mode is `ISTIO_MUTUAL`.	No
`caCertificates`	`string`	OPTIONAL: The path to the file containing certificate authority certificates to use in verifying a presented server certificate. If omitted, the proxy will not verify the server’s certificate. Should be empty if mode is `ISTIO_MUTUAL`.	No
`subjectAltNames`	`string[]`	A list of alternate names to verify the subject identity in the certificate. If specified, the proxy will verify that the server certificate’s subject alt name matches one of the specified values. If specified, this list overrides the value of subjectaltnames from the ServiceEntry.	No
`sni`	`string`	SNI string to present to the server during TLS handshake.	No

TLSSettings.TLSmode

TLS connection mode

Name	Description
`DISABLE`	Do not setup a TLS connection to the upstream endpoint.
`SIMPLE`	Originate a TLS connection to the upstream endpoint.
`MUTUAL`	Secure connections to the upstream using mutual TLS by presenting client certificates for authentication.
`ISTIO_MUTUAL`	Secure connections to the upstream using mutual TLS by presenting client certificates for authentication. Compared to Mutual mode, this mode uses certificates generated automatically by Istio for mTLS authentication. When this mode is used, all other fields in `TLSSettings` should be empty.

TrafficPolicy

Traffic policies to apply for a specific destination, across all destination ports. See DestinationRule for examples.

Field	Type	Description	Required
`loadBalancer`	`LoadBalancerSettings`	Settings controlling the load balancer algorithms.	No
`connectionPool`	`ConnectionPoolSettings`	Settings controlling the volume of connections to an upstream service	No
`outlierDetection`	`OutlierDetection`	Settings controlling eviction of unhealthy hosts from the load balancing pool	No
`tls`	`TLSSettings`	TLS related settings for connections to the upstream service.	No
`portLevelSettings`	`PortTrafficPolicy[]`	Traffic policies specific to individual ports. Note that port level settings will override the destination-level settings. Traffic settings specified at the destination-level will not be inherited when overridden by port-level settings, i.e. default values will be applied to fields omitted in port-level traffic policies.	No

TrafficPolicy.PortTrafficPolicy

Traffic policies that apply to specific ports of the service

Field	Type	Description	Required
`port`	`PortSelector`	Specifies the number of a port on the destination service on which this policy is being applied.	No
`loadBalancer`	`LoadBalancerSettings`	Settings controlling the load balancer algorithms.	No
`connectionPool`	`ConnectionPoolSettings`	Settings controlling the volume of connections to an upstream service	No
`outlierDetection`	`OutlierDetection`	Settings controlling eviction of unhealthy hosts from the load balancing pool	No
`tls`	`TLSSettings`	TLS related settings for connections to the upstream service.	No